Bismillahir Rahmani Rahim
Dear readers friends I hope you all are well I am also well by the grace of Allah with your prayers today I am presenting you some information and theory about putting bamboo on the tin shed of my house hope you will like it.
This can be a difficult task when bamboo is pressed, but it can be done. For this work we will need some materials like bamboo cutting knife, glass needle, bamboo cutting stone etc. Three of us can work together, if one person holds the bamboo, another can cut the bamboo and the third person can beat the bamboo. Using these materials we can successfully press bamboo.
Copyright free image download from pexels.com
If the bamboo is pressed, the first step is to find out how heavy it is. Then the three of you should clear it out. Some important tips:
A plate or any other flat material can be placed on top of the bamboo tin. This will act as a stress reliever on the tin.
When lifting the tin first make sure there are no animals on top of it.
The help of one or more persons may be taken to lift the tin.
If the tin is difficult to lift, dams or stakes can be used to suppress it.
Also some general rules should be followed for placing bamboo on tin. Among them are:
The bamboo should be just the right size to fit over the tin.
without putting too much pressure on the tin.
Care must be taken as applying excessive pressure on the tin can cause the tin to leak.
Care should be taken when placing the bamboo on the tin to avoid accidents.
The bamboos should be properly sized. Sometimes the tin can be punctured by the bamboo particles, so they must be cut off before being placed on the tin.
Copyright free image download from pexels.com
After pressing the bus on the tins, they should be tied with a wire or rope with something strong.
I conclude by wishing good health and long life to all those who patiently read my article. Allah is Hafez.
Comments